Teflon Coating, Nonstick Coatings, Powder Coatings and Compression Molding by Thermech
Our Coating Process
We thought it might be helpful to give you a general description of our coating process. Of course, there are many variations, and we have worked out the optimal combination of coating material and process for each type of commercial bakery equipment and how it is used.
First, the customer provides the equipment to be coated. We clean it by burning off organic materials at a high temperature in one of our ovens and then by sandblasting it. One of our expert coaters uses a PTFE-based liquid to coat the equipment with a spray gun that is powered by compressed air. Finally, we cure the coating in one of our ovens. We use at least the minimum temperatures specified by the FDA for the burnoff and the curing.
1773 West Lincoln Avenue, Building I
Anaheim, California 92801
(714) 533-3183
PERFECTING SURFACES
SINCE 1949
Home | Quality | Contact | About | History | Aerospace Coatings | Medical Device Coatings | Non-stick Commercial Bakery Coatings
Mold Release Coatings | Teflon® Coatings | Powder Coating | Compression Molding | Spray Coating Materials
Powder Coating Materials | Compression Molding Materials | Privacy Policy | Terms of Use | ©2010 Thermech Corporation. All Rights Reserved.
Teflon® is a registered trademark of E.I. du Pont de Nemours and Company used under license by Thermech Corporation. Only DuPont makes TEFLON®.