Mold Release Coatings
Mold Release Coatings
Perfecting Surfaces Since 1949 •
(714) 533-3183 info@thermech.com
Mold Release Coatings
Mold Release Coatings
Save Money on Materials
Why waste time and money each cycle spraying on expensive mold release?
One coating from Thermech will allow your molds to release easily for months or years, depending on usage. Most of the time, your molds will become obsolete before they need recoating.
We typically apply FEP Topcoat to molds to provide them with nonstick surfaces and resistance to chemicals and corrosion. Since FEP melt-flows to form nonporous film, it is a natural choice for low-abrasion release applications as is found in molds. But we never settle for using standard coatings. Want a textured coating for your smooth mold? No problem. Need a specific release speed? No problem. Whether you need a slow, medium or fast release, we will work with you to develop the best coating for your mold application.
We coat:
•EPS foam packaging molds
•Vacuum-form molds
•Thermoforming molds
•Rotational molds
•Rollers and dies
Speed Up Production
Because time is money in the mold business, we provide ultra-quick turnaround. We often complete jobs the same day we get them. Because of this, we coat molds for most of the major mold manufacturers in Southern California. In fact, we’re so fast that customers in other states send us their molds for coating. Even with the added shipping time, we get molds back to customers in other states and Mexico faster than their local coaters can.
Contact one of our mold release coating specialists at
(714) 533-3183 or email us at info@thermech.com.
Teflon® Coating / Spray Coating
Chemours Teflon Industrial Licensed Applicator
Whitford Licensed Applicator
PI / Vespel®
PPS / Ryton®
PES
FILLERS
THERMECH COATINGS
TECfluorcote
TECthermcote
DUPONT™ COATINGS
Teflon® PTFE
Teflon® FEP
Teflon® PFA
Teflon® One Coats
Teflon® PTFE/PFA Blends
WHITFORD® COATINGS
Xylan®
Xylan® XLR
Eclipse®
Dykor®
Xylar®
Halar® ECTFE
Teflon® ETFE
Teflon® FEP
Teflon® PFA
Ryton® PPS
PTFE Etching and Bonding
Home | Quality | Contact | About | History | Aerospace Coatings | Medical Device Coatings | Non-stick Commercial Bakery Coatings
Mold Release Coatings | Teflon® Coatings | Powder Coating | Compression Molding | Spray Coating Materials
Powder Coating Materials | Compression Molding Materials | Privacy Policy | Terms of Use | ©2010 Thermech Corporation. All Rights Reserved.
Teflon® is a registered trademark of E.I. du Pont de Nemours and Company used under license by Thermech Corporation. Only DuPont makes TEFLON®.
1773 West Lincoln Avenue, Building I • Anaheim, California 92801