ECTFE / Halar® Compression Molding
ECTFE / Halar® Compression Molding
ECTFE / Halar® Compression Molding
ECTFE (ethylene-chlorotrifluoroethylene) is a partially fluorinated, semi-crystalline, melt-processible polymer best known by the brand name Halar®.
ECTFE / Halar® Properties
•High tensile strength
•Ductile, welded corner seams will flatten before breaking
•Extraordinarily high impact strength at temperatures from -100 °F to +300 °F
•Resists permeation by chemicals in the pH 0-14 range, suitable for wetted parts
•Permeation resistance to chlorine gas, oxygen and carbon dioxide 10-100 times better than PTFE
•Excellent chemical resistance over a wide temperature range
•Resists semiconductor process chemicals
•Resists strong polar solvents such as DMF and NMP
•Ultrapure, very low extractable and leaching levels for demanding semiconductor applications
•Low outgassing
•Exceptionally smooth surface
•Easier to fabricate than most fluoropolymers, can be welded, machined, thermoformed and bonded
•Easy to fabricate with conventional welding equipment, with extremely strong welds
•Very good sliding properties
•High density
•Good insulation properties
•Very good weather resistance
•Food safe
•Self-extinguishing
•Approved and listed to the FM Global 4910 Clean Room Fire Safety Protocol as a fire-safe material for clean-room equipment
•The cost of fire-safe tools can be easily offset by eliminating the purchase and installation costs of fixed fire-suppression equipment
•Limited protection against stress cracking above 284 °F
ECTFE / Halar® Applications
•Chemical processing industry (CPI) applications
•High-purity semiconductor process tanks, liners and components
•Linings for ultrapure water systems in the semiconductor industry
•Exhaust systems
•Machine building industry applications
•Pharmaceutical applications
•Fluid-handling systems
•High-performance liquid chromatography (HPLC)
•Fire-safe components
•Chemical storage
Compression-molded ECTFE / Halar® Parts
•Wafer-cleaning equipment parts
•Wet etching equipment parts
•Wafer carriers for chemical or water wash
•DI water systems
•Parts that come into contact with aggressive chemicals
•Tank linings
•Filtration systems
•Flanges
•Fittings
•Centrifuge parts
•Stirring rods
•Spigots
ECTFE Compression Molding Resins
Halar® ECTFE from Solvay Specialty Polymers
•Halar® 901 ECTFE
•Halar® 902 ECTFE
Perfecting Surfaces Since 1949 •
(714) 533-3183 info@thermech.com
ECTFE / Halar® Compression Molding
Compression Molding and Machining of ECTFE / Halar®.
Teflon® Coating / Spray Coating
Chemours Teflon Industrial Licensed Applicator
Whitford Licensed Applicator
PI / Vespel®
PPS / Ryton®
PES
FILLERS
THERMECH COATINGS
TECfluorcote
TECthermcote
DUPONT™ COATINGS
Teflon® PTFE
Teflon® FEP
Teflon® PFA
Teflon® One Coats
Teflon® PTFE/PFA Blends
WHITFORD® COATINGS
Xylan®
Xylan® XLR
Eclipse®
Dykor®
Xylar®
Halar® ECTFE
Teflon® ETFE
Teflon® FEP
Teflon® PFA
Ryton® PPS
PTFE Etching and Bonding
Home | Quality | Contact | About | History | Aerospace Coatings | Medical Device Coatings | Non-stick Commercial Bakery Coatings
Mold Release Coatings | Teflon® Coatings | Powder Coating | Compression Molding | Spray Coating Materials
Powder Coating Materials | Compression Molding Materials | Privacy Policy | Terms of Use | ©2010 Thermech Corporation. All Rights Reserved.
Teflon® is a registered trademark of E.I. du Pont de Nemours and Company used under license by Thermech Corporation. Only DuPont makes TEFLON®.
1773 West Lincoln Avenue, Building I • Anaheim, California 92801