Pan Coating Process
Pan Coating Process
Pan Coating Process
We thought it might be helpful to give you a general description of our coating process. Of course, there are many variations, and we have worked out the optimal combination of coating material and process for each type of commercial bakery equipment and how it is used.
First, the customer provides the equipment to be coated. We clean it by burning off organic materials at a high temperature in one of our ovens and then by sandblasting it. One of our expert coaters uses a PTFE-based liquid to coat the equipment with a spray gun that is powered by compressed air. Finally, we cure the coating in one of our ovens. We use at least the minimum temperatures specified by the FDA for the burnoff and the curing.
Perfecting Surfaces Since 1949 •
(714) 533-3183 info@thermech.com
Pan Coating Process
Tefon® Coating Process for Baking Pans
Teflon® Coating / Spray Coating
Chemours Teflon Industrial Licensed Applicator
Whitford Licensed Applicator
PI / Vespel®
PPS / Ryton®
PES
FILLERS
THERMECH COATINGS
TECfluorcote
TECthermcote
DUPONT™ COATINGS
Teflon® PTFE
Teflon® FEP
Teflon® PFA
Teflon® One Coats
Teflon® PTFE/PFA Blends
WHITFORD® COATINGS
Xylan®
Xylan® XLR
Eclipse®
Dykor®
Xylar®
Halar® ECTFE
Teflon® ETFE
Teflon® FEP
Teflon® PFA
Ryton® PPS
PTFE Etching and Bonding
Home | Quality | Contact | About | History | Aerospace Coatings | Medical Device Coatings | Non-stick Commercial Bakery Coatings
Mold Release Coatings | Teflon® Coatings | Powder Coating | Compression Molding | Spray Coating Materials
Powder Coating Materials | Compression Molding Materials | Privacy Policy | Terms of Use | ©2010 Thermech Corporation. All Rights Reserved.
Teflon® is a registered trademark of E.I. du Pont de Nemours and Company used under license by Thermech Corporation. Only DuPont makes TEFLON®.
1773 West Lincoln Avenue, Building I • Anaheim, California 92801